Pink Anti-Static Bubble
Pink Amine Free Static Dissipative Material
- No ethoxylated tertiary amine (no corrosion to polycarbonate boards)
- No greasy or oily feeling
- No allergic reaction
- No greasy pattern markings on product
- Tape will adhere to new Static Free Bubble
- New Static Free Bubble is not affected by humidity or high temperature
- New Static Free Bubble is static free throughout its volume; not just the surface
- Meets Electrical Specifications of MIL-PRF-81705D Type II, PPP-C 795C Class II
Electrical Properties:
| Test Method | Anti Static Values | |
|---|---|---|
| Static Decay Rate | 5KV-O Volts | <2.0 Seconds |
| Surface Resistivity | ASTM-D-257 | 10(10) ohms/sq. |
Physical Properties:
| Test Method | Unit of Measure | Typical Values | |
|---|---|---|---|
| Color | Pink | ||
| Cell Height | 1/8, 3/16, 5/16, ½ | ||
| Auto ignition | 343°C(649.4 °F) | ||
| odor | Faint, mild hydrocarbon odor |
Chemical Properties:
| Freezing Point/Melting Point | 104 – 138 °C (649.4 °F) |
| Flammability | Not Classified. Polymer will burn but does not Easily ignite |
| Relative Density | 0.91 – 0.98 |
| Solubility (Water) | Insoluble |
Users are advised to test the product in advance to make certain it is suitable for their particular production conditions and particular uses. The information and suggested applications set forth herein is furnished free of charge and are based on technical data that SECO Industries believes to be reliable. SECO Industries believes the data values to be typical for the product; however, actual values may vary somewhat from those depicted here. This information is intended for use by persons having technical skill, at their own discretion and risk. Since conditions of use vary and are outside its control, SECO Industries makes NO warranties, express or implied, and assumes no liability in connection with any use of this product.