Rhino Shield 502

Anti-Static Black Poly/Foil Nylon

 

• Rhino Shield 502 is intended for applications requiring a flexible, heat sealable, barrier material with low MVTR and maximum physical strength
• Can be used for protection of extremely critical or sensitive devices susceptible to damage by ESD, EMI, moisture and corrosion
• 48” wide roll stock available.  Special widths available upon request
• Construction – Metalized Polyester / Polyethylene / aluminum Foil / Anti Static Polyethylene
• Meets military specifications of Mil-Prf-81705C Ty-1, CL-1(mil spec printed)

Electrical Properties: 

	Test Method	Anti Static Values
Surface Resistivity	ASTM-D-257	Ohms/sq
Outer Surface		32x10(11)
Inner Surface		1.05x10(11)
Charge Generation	Fed.TM 4046	Seconds
Inner Surface		.01 to .02
EMI Attenuation	Mil-B-81705	38.8 dB
Static Shielding	EIA-541	-2V + 3V

Physical Properties:

	Test Method	Unit of Measure	Typical Values
Color		Opaque
Thickness		.0032
Yield		sq in/lb	7200
Tear Strength	ASTM-689	grams
		MD	70
		XMD	70
Puncture Strength	Fed.TM 2065	lbs	19
Heat Seal Strength	ASTM-D882	lbs/in	13
M.V.T.R	Mocon	gms/100 in /24hrs
Flat			.006

 

Users are advised to test the product in advance to make certain it is suitable for their particular production conditions and particular uses.  The information and suggested applications set forth herein is furnished free of charge and are based on technical data that SECO Industries believes to be reliable.  SECO Industries believes the data values to be typical for the product; however, actual values may vary somewhat from those depicted here.  This information is intended for use by persons having technical skill, at their own discretion and risk.  Since conditions of use vary and are outside its control, SECO Industries makes NO warranties, express or implied, and assumes no liability in connection with any use of this product.