Rhino Shield 532

Anti-Static Poly/Foil

 

• Rhino Shield 532 is opaque, electrostatic and EMI/RFI protective, very high barrier-aluminum foil structure (.006)
• Excellent puncture resistance, waterproof, vaporproof, and greaseproof protection.
• Barrierstat    foil is available in non static dissipative clean room and Permastat     Antistatic versions.
• Interior sealing film is specially formulated to maximize seal strength and eliminate “leaker” in difficult vacuum sealing applications, such as SMD tape and reel, quad flat packs, JEDC trays and stripping tubes.

Electrical Properties: 

	Test Method	Anti Static Values
Static Decay Rate	FTMS 101C	<.1
Surface Resistivity	ASTM-D-257, 12%RH	10(12)ohms/sq.
Capacitance Probe	EIA 541	<10V, <20ms
EMI Attenuation	Mil 81705C	>40

Physical Properties:

	Test Method	Unit of Measure	Typical Values
Color		Opague
Thickness		.006
Yield	WEB G 103	sq/in²/lb	4369
Tear Strength	ASTM-D 1004	grams	>2
		MD	70
		XMD	70
Puncture Strength	FTMS 101C	lbs	16
Heat Seal Strength	Mil 81705C	lbs/in	13
M.V.T.R	ASTMF 1249	gms/100 in²/24hrs	<.005

Chemical Properties:
Corrosion

No effect on aluminum, copper, silver, Pb-Sn coated foil stainless steel, Low carbon steel

Polycarbonate Compatible Amines  

Non Present

 

Users are advised to test the product in advance to make certain it is suitable for their particular production conditions and particular uses.  The information and suggested applications set forth herein is furnished free of charge and are based on technical data that SECO Industries believes to be reliable.  SECO Industries believes the data values to be typical for the product; however, actual values may vary somewhat from those depicted here.  This information is intended for use by persons having technical skill, at their own discretion and risk.  Since conditions of use vary and are outside its control, SECO Industries makes NO warranties, express or implied, and assumes no liability in connection with any use of this product.