Rhino Shield 590
Anti-Static Poly/Foil
- Excellent puncture resistance, barrier material, waterproof, flexible, heat sealable and greaseproof protection.
- Barrier 590 offers low water vapor transmission and maximum physical strength.
- Fabricated into pouches, bags, or envelopes, used for the protection of extremely critical or delicate items susceptible to damage by corrosion.
- 36” and 48” wide roll stock – special widths available on request.
- Construction – Tyvek/Polyethylene/Aluminum Foil/Polyethylene
Physical Properties:
| Test Method | Unit of Measure | Typical Values | |
|---|---|---|---|
| Color | Opaque | ||
| Thickness | .009 | ||
| Yield | WEB G 103 | sq/lbs | 4307 |
| Tensile Strength | ASRM 882 | psi | |
| MD | 5000 | ||
| XMD | 5000 | ||
| Tear Strength | ASTM-D 1004 | grams | 300 |
| MD | 400 | ||
| XMD | 70 | ||
| Puncture Strength | FTMS 101C 2065 | lbs | 15 |
| Heat Seal Strength | ASTM 882 | lbs | 11 |
| 375 F, 40 psi 1 sec | |||
| M.V.T.R | FTMD 101C | gms/100in²/24hrs | .02 |
| Method 3030 |
*Notes: Tyvek – Du Pont’s Trademark for Spun Bonded Polyolefin
Users are advised to test the product in advance to make certain it is suitable for their particular production conditions and particular uses. The information and suggested applications set forth herein is furnished free of charge and are based on technical data that SECO Industries believes to be reliable. SECO Industries believes the data values to be typical for the product; however, actual values may vary somewhat from those depicted here. This information is intended for use by persons having technical skill, at their own discretion and risk. Since conditions of use vary and are outside its control, SECO Industries makes NO warranties, express or implied, and assumes no liability in connection with any use of this product