SECOVAC 140

Clear Mono Extruded LDPE Material

 

• Comercial grade mono extruded film. Designed for a wide variety of packaging needs
• When specified can meet FDA requirments for use in food applications
• Can be sealed with most standard heat sealing equipment

 

Physical Properties:

	Test Method	Unit of Measure	Typical Values
Color		Clear
Thickness		.002-.008
Tensile Strength		psi	1500-3000
Tear Strength	ASTM-689	lbs. per inch	65-450
Burst Strength	Mullen	psi	20-60
Heat Seal Strength	250-375 degrees F	30-70 psi	0.5-.35 seconds
Elongation	MD%		<550
Dart Impact		gms	250-700

Sizes:
Bag Width – 2” to 72”
Bag length – 3” to as long as required

 

Users are advised to test the product in advance to make certain it is suitable for their particular production conditions and particular uses.  The information and suggested applications set forth herein is furnished free of charge and are based on technical data that SECO Industries believes to be reliable.  SECO Industries believes the data values to be typical for the product; however, actual values may vary somewhat from those depicted here.  This information is intended for use by persons having technical skill, at their own discretion and risk.  Since conditions of use vary and are outside its control, SECO Industries makes NO warranties, express or implied, and assumes no liability in connection with any use of this product.