SECOVAC 142
Clear Amine Free Static Dissipative Material
- Polycarbonate compatible, low out gassing, non corrosive
- Eliminates the hazard of static damage to electronic components
- Meets Electrical Specifications of MIL-PRF-81705D TYPE 11
- Extended shelf life
Electrical Properties:
| Test Method | Anti Static Values | |
|---|---|---|
| Static Decay Rate | ASTM 101, 4046 | <1.0 Second |
| Surface Resistivity | ASTM-D-257 | <10E 12 Ohms/sq |
| Polycarbonate Haze | 72 Hr. Contact | NE |
| Corrosivity Observations | FTMS 101C,3005 | NE |
Physical Properties:
| Test Method | Unit of Measure | Typical Values | |
|---|---|---|---|
| Color | Clear | ||
| Thickness | .002-.008 | ||
| Tensile Strength | psi | 1500-3000 | |
| Tear Strength | ASTM-689 | lbs. per inch | 65-450 |
| Burst Strength | Mullen | psi | 20-60 |
| Heat Seal Strength | 250-375 degrees F | 30-70 psi | 0.5-.35 seconds |
| Elongation | MD% | <550 | |
| Dart Impact | gms | 250-700 |
Sizes:
Bag Width – 2” to 72”
Bag length – 3” to as long as required
Users are advised to test the product in advance to make certain it is suitable for their particular production conditions and particular uses. The information and suggested applications set forth herein is furnished free of charge and are based on technical data that SECO Industries believes to be reliable. SECO Industries believes the data values to be typical for the product; however, actual values may vary somewhat from those depicted here. This information is intended for use by persons having technical skill, at their own discretion and risk. Since conditions of use vary and are outside its control, SECO Industries makes NO warranties, express or implied, and assumes no liability in connection with any use of this product.